姓名：张振秀
职位/职称：教授
工作单位：青岛科技大学
工作经历：
青岛软控重工股份有限公司， 工程师， 1999 年 8月 - 2002年 8月
韩国国立庆尚大学， 研究教授 2011 年 1月 - 2012年 2月
青岛科技大学 讲师，副教授，教授， 2012 年2月 – 至今
代表性著作：
Lightweight and flexible silicone rubber foam with dopamine grafted multi-walled carbon nanotubes and silver nanoparticles using supercritical foaming technology: Its preparation and electromagnetic interference shielding performance,European Polymer Journal, 161 (2021) 110839
Ultra-light poly(lactic acid)/SiO2 aerogel composite foam: A fully biodegradable and full life-cycle sustainable insulation material，International Journal of Biological Macromolecules, 306 (4) : 1029-1039, 2021
Microcellular Conductive Carbon Black or Graphene/PVDF Composite Foam with 3D Conductive Channel: A Promising Lightweight, Heat‐Insulating, and EMI‐Shielding Material, Macromolecular Materials and Engineering, 306(4) :2000759, 2021
Lightweight self-cleaning trans-polyisoprene/multiwalled carbon nanotubes open-cell composite material: Its electromagnetic shielding performance, eXPRESS Polymer Letters, 15(9): 865–877,2021
A new TPE-based foam material from EPDM/PPB blends, as a potential buffer energy-absorbing material, eXPRESS Polymer Letters, 15(2): 89–103, 2021
2020
Influence of 1-butene content on mechanical, thermal, and cushioning properties of propylene/1-butene copolymer foamed by supercritical carbon dioxide, the Journal of Supercritical Fluids, 165, 104987, 2020
Ultra-light, heat-resistant, flexible and thermal insulation graphene-fluororubber foam prepared by using N2 as a blowing agent, Colloids and Surfaces A, 604, 125310, 2020
Micro/Nanocellular Polyprolene/Trans-1,4-Polyisomprene (PP/TPI) Blend Foams by Using Supercritical Nitrogen as Blowing Agent, Polymer Engineering and Science, 60:211–217, 2020
2019
A Developed, eco-friendly, and flexible thermoplastic elastomeric foam from SEBS for footwear Application, EXPRESS Polymer Letters, 13(11) 948–958, 2019
Lightweight, Elastomeric, and Flame-Foams from Expanded Chlorinated Polymers, Macromolecular Materials and Engineering,304, 1900145, 2019
Physicomechanical, friction and abrasion properties of EVA/PU blend foams foamed by supercritical nitrogen, Polymer Engineering and Science, 58:673–682, 2018
Microcellular foaming of chlorosulfonated polyethylene rubber and its kaolin-filled compounds with supercritical nitrogen, Journal of Applied Polymer Science, 135(1), 45656,2018
Foaming of trans-Polyisoprene and its silica filled compounds using supercritical N2 as the blowing agent, Polymers For Advanced Technologies, 29:716–725,2018
2017
Microcellular Chlorinated Polyethylene (CM) Rubber foam by using N2 as blowing agent, Journal of Polymer Research, 24:175,2017
Fabrication of a thin-layer PTFE coating exhibiting superhydrophobicity by supercritical CO2, Progress in Organic Coatings, 111: 322–326,2017
代表性项目：
聚乳酸改性与发泡性能的研究
功能性多孔ABS材料的制备及应用
TPI超临界二氧化碳发泡及形状记忆性能的研究
气凝胶复合材料的制备及性能研究
TPI微孔发泡材料的制备与性能研究
芳纶纤维表面改性及其与橡胶黏合性能的研究
PVDF微孔材料的制备与性能研
丙烯/1-丁烯共聚物（PPB）发泡材料的制备及性能研究
功能性胶乳海绵复合材料的制备及性能研究
氟橡胶复合材料的制备与应用研究
TPEE超临界发泡材料的制备与性能研究
尼龙热塑性弹性体微孔发泡材料的制备与性能研究
热塑性聚氨酯发泡材料的制备及性能研究
弹性体EVM超临界发泡材料的制备及性能研究
苯乙烯热塑性弹性体发泡材料的制备与性能研究
泡沫材料的表面改性在污水处理中的研究与应用
